Accent Walls & Custom Wall Finishes in Miami

One wall changes the whole room. Paint, wood slat, board & batten, shiplap, or plaster — built clean, in a condo-friendly visit.

Book Now Get a Free Estimate

The styles

Five ways to build a feature wall

Every style is quoted upfront for your wall's dimensions; materials are added at cost on the final invoice.

Painted Accent Wall

A single bold color or pattern on the feature wall — the fastest way to change a room.

Wall prep and patch, primer, two finish coats, crisp taped edges, full cleanup.

Wood Slat Wall

Vertical slats with shadow gaps — the warm, modern look Miami condos ask for most.

Layout to your wall's dimensions, stained or painted slats, hidden fasteners.

Board & Batten

Classic vertical paneling, primed and painted — above wainscoting or floor to ceiling.

MDF or pine boards, custom spacing, caulked seams, nail holes filled and finished.

Shiplap Panel Wall

Horizontal boards for a coastal or modern-farmhouse feel, painted or left natural.

Leveled layout, tongue-and-groove or flat shiplap, corner and trim finish.

Textured Finish

Venetian plaster, limewash, sand, or knockdown texture — a designer look in one visit.

Surface prep, base coat, texture application, sealer where the finish needs it.

Not sure which style fits your room?

Send us a photo of the wall — we'll tell you honestly what will work on it and quote it the same day.

Get a free estimate

Painted Accent Wall

A single bold color or pattern on the feature wall — the fastest way to change a room.

Wall prep and patch, primer, two finish coats, crisp taped edges, full cleanup.

Wood Slat Wall

Vertical slats with shadow gaps — the warm, modern look Miami condos ask for most.

Layout to your wall's dimensions, stained or painted slats, hidden fasteners.

Board & Batten

Classic vertical paneling, primed and painted — above wainscoting or floor to ceiling.

MDF or pine boards, custom spacing, caulked seams, nail holes filled and finished.

Shiplap Panel Wall

Horizontal boards for a coastal or modern-farmhouse feel, painted or left natural.

Leveled layout, tongue-and-groove or flat shiplap, corner and trim finish.

Textured Finish

Venetian plaster, limewash, sand, or knockdown texture — a designer look in one visit.

Surface prep, base coat, texture application, sealer where the finish needs it.

Not sure which style fits your room?

Send us a photo of the wall — we'll tell you honestly what will work on it and quote it the same day.

Get a free estimate

See the difference

One wall changes the whole room

Drag the handle to compare a plain builder-beige wall with the wood-slat treatment — the style Miami condos ask for most.

Every style is quoted upfront for your wall's exact dimensions. Send a photo of your room and we'll tell you which treatment will work on your wall — honestly.

Quote my wall

Plain wallWood slat

Drag the handle to compare

How we work

Five steps to a finished feature wall

The same sequence on every wall — because the prep and the finish details are what make it look built-in, not bolted on.

Protect and prep

Floors covered, furniture moved and draped, outlets and trim taped. The wall is patched and sanded before anything decorative happens.

Layout and level

Slat spacing, batten grid, or pattern lines measured to your wall's exact dimensions and snapped level — this step decides the final look.

Build or paint the feature

Boards cut and fastened into studs, or the finish rolled and cut in with crisp taped edges — using low-VOC materials in occupied homes.

Caulk, fill, and finish

Seams caulked, nail holes filled, touch-up coats applied. The details that separate a feature wall from a weekend project.

Clean up and reveal

Tape pulled, dust vacuumed, furniture back in place. You see the finished wall in a clean room — usually the same day or the next.

STEP 1
Protect and prep
Floors covered, furniture moved and draped, outlets and trim taped. The wall is patched and sanded before anything decorative happens.
STEP 2
Layout and level
Slat spacing, batten grid, or pattern lines measured to your wall's exact dimensions and snapped level — this step decides the final look.
STEP 3
Build or paint the feature
Boards cut and fastened into studs, or the finish rolled and cut in with crisp taped edges — using low-VOC materials in occupied homes.
STEP 4
Caulk, fill, and finish
Seams caulked, nail holes filled, touch-up coats applied. The details that separate a feature wall from a weekend project.
STEP 5
Clean up and reveal
Tape pulled, dust vacuumed, furniture back in place. You see the finished wall in a clean room — usually the same day or the next.

Common questions

Accent wall questions

Can you do an accent wall in a condo?

Yes. All our accent wall work is interior, so there's no HOA approval needed in most cases. We use low-VOC paints and clean up completely — great for condo living.

How long does an accent wall take?

A painted accent wall is typically done in half a day. Slat, board & batten, and shiplap projects take 1–2 days depending on wall size and drying time.

How does pricing work?

We quote the labor upfront based on your wall size and the style you choose, and materials are added at cost on the final invoice. Send a photo of the wall and we'll quote it the same day.

Which style should I pick?

Paint for speed and budget, slat or board & batten for architecture and depth, plaster or limewash for a soft high-end finish. Send us a photo of the room and we'll tell you honestly what will work on your wall.

Ready to transform a room?

Send us a photo of the wall and what you have in mind — we'll quote you the same day.

Book Now Get a Free Estimate